Introduction of basket-type (two rooms) thermal shock chamber: this chamber is suitable for the product (complete machine), parts, materials to estimate the ability to bear speedy temperature change. This test can know the influence caused by the temperature variation one or more times on the test samples. The main parameters to influence the temperature change test have the max value and min value of temperature change range, the hold time of the samples under high temperature and low temperature, the number of test cycle, etc.
 
 Introduction of basket-type (two rooms) thermal shock chamber

Type						CJ601S2			CJ603S2		CJ605S2
Performance parameters	High temperature room	Temperature exposure range			+60～＋200℃
		Upper limit of preheating temperature			200℃
		Temperature increasing time			R.T.→＋200℃ approx. 40min
	Low temperature room	Temperature exposure range			0～-75℃
		Lower limit of pre-cooling temperature			-75℃
		Temperature decreasing time			R.T.→-70℃ approx. 60min
	Basket	Temperature range			-65～150℃
		Temperature fluctuation			≤1℃（≤±0.5℃，according to GB/T5170-1996）
		Temperature deviation			≤±2℃（-65℃～+150℃）
	Switching time				≤5S
	Temperature recovering time				≤5min
	Temperature recovery conditions		CJ601S2	condition 1	exposure in high temperature +150℃, exposure in low temperature -65℃，exposure duration 30min，sample weight  5Kg Al
				condition 2	exposure in high temperature 120℃, exposure in low temperature -40℃， exposure duration 30min, sample weight  10Kg Al
			CJ603S2	condition 1	exposure in high temperature +150℃, exposure in low temperature -65℃, exposure duration 30min， sample weight  10Kg Al
				condition 2	exposure in high temperature 120℃， exposure in low temperature -40℃， exposure duration 30min, sample weight  30Kg Al
			CJ605S2	condition 1	exposure in high temperature +150℃, exposure in low temperature -65℃, exposure duration 30min, sample weight 15Kg Al
				condition 2	exposure in high temperature 120℃， exposure in low temperature -40℃， exposure duration 30min, sample weight  30Kg Al
Structure	Shell				Cold-rolled steel plate with surface spray（ivory）
	Inner wall material				Stainless steel plate
	Thermal insulation material				Polyurethane foam+ superfine glass wool
Refrigeration	Refrigerating method				Air cooling			Water cooling
	Refrigerator				Imported compressor
Temperature sensor					Armoured PT100
Controller					Siemens PLC module + 7-inch color LCD touch control screen
Data storage and functional interface					Native SD data card, RS485 interface, USB interface
Basket dimension (mm)			D		300		500			600
			W		460		610			660
			H		350		400			450
External dimension (mm)			D		2250		2720			2920
			W*		1200		1050			1100
			H		1950		1950			2150
Installed power（KW）					19.7KVA		32KVA			36KVA
Power supply					AC380V 50Hz three phase four wire + ground wire
Standard configuration					1 product operation manuals. 1 test report, 1 certification, 1 quality certificate, 5 printing papers, 2 layers of shelves and 4 racks, 1 ribbon with castors
Satisfy the standards					GJB 150.3、GJB 150.4、GJB150.5、GB/T 2423.1、GB/T 2423.2